ICS - Internet Component Suite - V9.1 - Delphi 7 to RAD Studio 12 ================================================================= (Aka FPIETTE's Components) Revised: February 09, 2023 Release: V9.1 https://www.overbyte.be/ https://wiki.overbyte.be/ https://www.overbyte.eu/ https://wiki.overbyte.eu/ https://svn.overbyte.be/svn/ics/ PENDING V9.1 changes see svn-changelog-icsv9.txt ICS is a free internet component library for all Delphi, C++Builder, BDS and RAD Studio versions. It includes TCP, UDP, raw sockets, clients, servers, as well as all the main high level protocols such as FTP, SMTP, POP3, NNTP, HTTP and more. ICS also supports SSL/TLS with the help of OpenSSL. Table of content: ----------------- - Legal issues - Donate - Register - Contributions - Latest Versions - Version Control repository - Installation - Available VCL Components - Sample applications - About SSL - Support - Release notes - Midware - Known problems - Special thanks Legal issues: ------------- Copyright (C) 1997-2023 by François PIETTE Rue de Grady 24, 4053 Embourg, Belgium SSL implementation includes code written by Arno Garrels, Berlin, Germany ICS is freeware. This software is provided 'as-is', without any express or implied warranty. In no event will the author be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented, you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. 4. You must register this software by sending a picture postcard to the author. Use a nice stamp and mention your name, street address, EMail address and any comment you like to say. 5. As this code make use of OpenSSL, your rights are restricted by OpenSSL license as soon as you use any SSL feature. See http://www.openssl.org for details. Donate ------ ICS is freeware. You can use it without paying anything except the registration postcard (see "register" below). But of course donations are welcome. You can send cash (Euro currency or US Dollars) in an envelop to my street address or buy a gift certificate at Amazon in the UK. I will then use it to buy books. Here is the direct URL at Amazon UK (nearest to my home, please don't use another): http://www.amazon.co.uk/exec/obidos/gc-email-order1/ref=g_gc_email/202-6198323-6681414 For more generous amount, contact me by email. Register -------- ICS is freeware. If you use the components, you must register by sending a picture postcard showing the area you live in and some beautiful stamps for my kids who are stamp collectors. Do not use an envelop, I collect USED postcards sent to me. Write on the postcard that it is your ICS registration. Address your card to: Francois PIETTE, rue de Grady 24, 4053 Embourg, Belgium. Don't forget to mention your name, street address, EMail and web site. Contributions: -------------- ICS has been designed by François PIETTE but many other peoples are working on the components and sample programs. The history of changes in each source file list all developers having contributed (When no name is given, the change is by F. Piette). I can't list all contributors here but I want to specially thanks two specially active contributors: - Arno Garrels - Angus Robertson Support: -------- A new web support forum was created for ICS in February 2019: https://en.delphipraxis.net/forum/37-ics-internet-component-suite/ Once registered, it is possible to follow a forum with email messages for new posts, or a daily summary like the old mailing list. The old twsocket mailing list ceased accepting new messages in late 2018, but 20 years of archived messages are still available at: http://lists.elists.org/pipermail/twsocket/ Latest versions: --------------- The latest versions of ICS can be downloaded from the ICS Wiki web site: https://wiki.overbyte.eu/wiki/index.php/ICS_Download ICS V5, V6, V7 and V8 are archive releases no longer updated or supported. ICS V9 is the long term support release which is held in a public Version Control repository that is zipped each night for easy download. The download page above also includes the OpenSSL binaries needed to support SSL. ICS V9 supports Delphi 64-bit and Mac OS-X projects. Note that C++ Builder versions supported are up to XE3, 10.2 Tokyo and later. There are currently no C++ packages for XE4 to 10.1. but older or newer ones will often work. The latest version is V9.0 which will be reported by the CopyRight constant in OverbyteIcsWSocket.pas and the integer WSocketVersion as 901. ICS V10 is in early development and is planned to support Android and Linux Server. There are no current plans for ICS for iOS. Version Control repository: --------------------------- svn://svn.overbyte.be/ics/trunk or https://svn.overbyte.be/svn/ics/trunk (Usercode = ics, password = ics) Platforms and Targets --------------------- The latest version of ICS supports Windows 32-bit and 64-bit targets using VCL and FMX components, and Apple MacOS 32-bit and 64-bit platforms with FMX (Delphi permitting). Testing of ICS is primarily with Windows 11 and Server 2019 and 2022, also Windows 10. Note that Windows XP is not supported and SSL will not work. Windows 7, 8 and Server 2008 R2 and Server 2012 are still be supported but testing is minimal. Installation: ------------- ICS V9 has been designed for Embarcadero Delphi 2009 and up, and C++ Builder 2009 and up, but is mostly compatible with Borland Delphi 7 and CodeGear 2006 and 2007. Delphi 7 does not have TWebBrowser so the TOAuthLoginForm unit is missing. Embarcadero RAD Studio includes Delphi and C++ Builder. https://www.embarcadero.com/ With Delphi XE2 and later, VCL 64-bit Windows targets are supported for Delphi only. Currently FireMonkey is partly supported for Delphi only (there are still a few non-ported components). ICS for Mac OSX is currently experimental. The zip file has sub-directories in it. You must use the WinZip "Use folder names" option to restore this directory tree or you will have problems because the files would not be in their proper subdirectories. Please note most of these directories are differently named to ICS V7 and earlier, to ease support of multiple versions of Delphi and platforms, and to ease location of similar sample projects. Please don't install V9 over an existing V7 installation, it will be a mess of old and new. This is the V9 sub-directory layout: .\ Info directory .\Install Component packages project groups for all versions .\Packages (was Delphi\Vc32) Delphi (7 and up) and C++Builder (2006 and up) packages projects .\Source (was Delphi\Vc32) ICS Delphi source code built into packages .\Source\Include (was Delphi\Vc32) .inc files (including OverbyteIcsDefs.inc) .\Source\Extras (was Delphi\Vc32) Extra source code not built into packages .\Source\zobj125 (was Delphi\Vc32) ZLIB C OBJ include files .\Lib Unit output directories for all package builds, subdirectories | for 2007+ will be created on building the packages \$(Config) Release / Debug | \$(Platform) Win32 / Win64 / OSX32 / OSX64 | \ D7..XE8, 10 Seattle includes .dcu and .dfm files for Delphi and .obj and .hpp files for C++ Builder .\Samples Delphi Win32/Win64 common source for all demos .\Samples\delphi\BroswerDemo Delphi Win32/Win64 Web Browser sample application (all Delphi versions) .\Samples\delphi\BroswerDemo\Resources Resource file, web pages and movie linked into browser demo .\Samples\delphi\FtpDemos Delphi Win32/Win64 FTP sample applications (all Delphi versions) .\Samples\delphi\MailNewsDemos Delphi Win32/Win64 SMTP, POP3, NNTP sample applications (all Delphi versions) .\Samples\delphi\MiscDemos Delphi Win32/Win64 Miscellaneous applications (all Delphi versions) .\Samples\delphi\OtherDemos Delphi Win32/Win64 DNS, Ping, SNMP, Syslog sample applications (all Delphi versions) .\Samples\delphi\PlatformDemos Delphi FireMonkey and cross-platform samples (Delphi XE2+) .\Samples\delphi\SocketDemos Delphi Win32/Win64 Socket sample applications (all Delphi versions) .\Samples\delphi\sslinternet Delphi Win32/Win64 SSL-enabled sample applications (all Delphi versions) .\Samples\delphi\WebDemos Delphi Win32/Win64 HTTP sample applications (all Delphi versions) .\Samples\delphi\WebDemos\WebAppServerData Directory for WebAppServ demo data files .\Samples\delphi\WebDemos\WebServData Directory for WebServ demo data files .\Samples\cpp\internet C++Builder sample applications .\Samples\cpp\internet\cb2006 C++Builder 2006 projects .\Samples\cpp\internet\cb2007 C++Builder 2007 projects .\Samples\cpp\internet\cb2009 C++Builder 2009 projects .\Samples\cpp\internet\cb2010 C++Builder 2010 projects .\Samples\cpp\internet\cbXE C++Builder XE projects .\Samples\cpp\internet\cbXE2 C++Builder XE2 projects UPGRADING and REINSTALLING Uninstall an existing ICS package (Menu | Component | Install Packages, select the component package and click Remove). Rename the old ICS directory and unzip to a new or empty directory, remove the old path from the library path and add either the new .\Source directory to the library path under Tools | Options |... or the appropriate .\Lib subdirectory according to version, ie .\Lib\Debug\Win32\D2007 for Delphi 2007. The latter has the advantage that the ICS source code won't be recompiled whenever your project is build. Also under Tools | Options |... add the new .\Source directory to the Browsing path. All DELPHI and C++ BUILDER VERSIONS/WIN32 Always upgrade your compiler with the latest update available from Embarcadero. Always update your system with https://windowsupdate.microsoft.com SSL or not SSL? By default the SSL code is compiled into the run-time package and additional SSL- enabled components are installed. In order to not compile the SSL code into the run-time package and to not install the SSL-Enabled components you need to remove the conditional define USE_SSL from both the run-time and design-time package. However if you do not build your applications with run-time packages it is recommended to build the packages with default settings. The SSL code will the be compiled into your applications depending on whether the conditional define USE_SSL is set in the project options or not (this requires having the .\Source directory in either in the library path or in projects Search path). Note the use of USE_SSL is historical from when SSL was a chargeable extra and future versions of ICS may always build with SSL to reduce the heavy support burden of building with and without SSL. Most modern applications need SSL. All new ICS components in the last few years have been SSL only. Actual use of SSL in your applications also requires OpenSSL files: libcrypto-3.dll or libcrypto-3-x64.dll libssl-3.dll or libssl-3-x64.dll legacy.dll or legacy-x64.dll being available somewhere in the path. For safety, it is common to place the OpenSSL DLLs in the application directory to ensure a known version is used, beware Delphi often builds to different sub-directories for platform and target so DLLs may be needed in many directories. The legacy DLLs are only needed if support for old algorithms is needed, but this includes most PFX/PCS12 certificates. The ICS distribution includes the latest Win32 OpenSSL 3.1 files in the .\OpenSSL-Win32 directory and the six main DLLs duplicated in .\Samples\delphi\sslinternet for Win32 and Win64 samples. ICS V9 also works with OpenSSL 3.0, which is supported until September 2026. Samples also includes the old OpenSSL 1.1.1 DLL files which go out of support in September 2023. Note OpenSSL 1.1.1 and later only support Windows Vista and later, and Windows Server 2008 and later, not Windows XP. Other OpenSSL files, including older and Win64, may be downloaded from: http://wiki.overbyte.eu/wiki/index.php/ICS_Download Note that OpenSSL support for 1.0.2 and 1.1.0 ceased in 2019 with no more security fixes, and ICS V8.66 and later no longer support them. ICS will try and load OpenSSL 3.0 or 3.1 first, then 1.1.1 if not found, unless the global variable GSSLEAY_DLL_IgnoreNew is set true before OpenSSL is loaded. Likewise GSSLEAY_DLL_IgnoreOld may be set true to ignore 1.1.1 and fail unless 3.0 or 3.1 is available. Setting both GSSLEAY_DLL_IgnoreNew and GSSLEAY_DLL_IgnoreOld to true is ignored. ICS also supports YuOpenSSL which provides OpenSSL in a pre-built DCU statically linked into applications, rather than using external OpenSSL DLLs. This make application distribution more reliable since it can no fail by users deleting the DLLs or copying incompatible versions into the directory. YuOpenSSL is a commercial product from https://www.yunqa.de/ and is supplied as separate compiled DCUs for Delphi 5 to 11.3. DEFINE YuOpenSSL in Include\OverbyteIcsDefs.inc determines whether the DCU is linked or the external DLLs. Note only one version of OpenSSL can be linked with YuOpenSSL, whereas different DLLs can be supported. Apart from setting the define and adding a path to YuOpenSSL.dcu, no other application code changes are needed unless you check or report the DLL version directly. INSTALLATION USING THE INSTALL PROJECT GROUPS For each Delphi and C++ Builder version one project group is provided in directory .\Install: Delphi 7 : D7Install.bpg Delphi 2006 : D2006Install.bdsgroup Delphi 2007 : D2007Install.groupproj Delphi 2009 : D2009Install.groupproj Delphi 2010 : D2010Install.groupproj Delphi XE : DXeInstall.groupproj Delphi XE2 : DXe2Install.groupproj // VCL only, no FireMonkey components Delphi XE2 : DXe2InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi XE3 : DXe3Install.groupproj // VCL only, no FireMonkey components Delphi XE3 : DXe3InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi XE4 : DXe4Install.groupproj // VCL only, no FireMonkey components Delphi XE4 : DXe4InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi XE5 : DXe5Install.groupproj // VCL only, no FireMonkey components Delphi XE5 : DXe5InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi XE6 : DXe6Install.groupproj // VCL only, no FireMonkey components Delphi XE6 : DXe6InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi XE7 : DXe7Install.groupproj // VCL only, no FireMonkey components Delphi XE7 : DXe7InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi XE8 : DXe8Install.groupproj // VCL only, no FireMonkey components Delphi XE8 : DXe8InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi 10 Seattle : D10SInstall.groupproj // VCL only, no FireMonkey components Delphi 10 Seattle : D10SInstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi 10.1 Berlin : D101Install.groupproj // VCL only, no FireMonkey components Delphi 10.1 Berlin : D101InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi 10.2 Tokyo : D102Install.groupproj // VCL only, no FireMonkey components Delphi 10.2 Tokyo : D102InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi 10.3 Rio : D103Install.groupproj // VCL only, no FireMonkey components Delphi 10.3 Rio : D103InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi 10.4 Sydney : D104Install.groupproj // VCL only, no FireMonkey components Delphi 10.4 Sydney : D104InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi 11 : D110InstallVcl.groupproj // VCL only, no FireMonkey components Delphi 11 : D110InstallFmx.groupproj // FMX, no VCL components Delphi 11 : D110InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi 12 : D120InstallVcl.groupproj // VCL only, no FireMonkey components Delphi 12 : D120InstallFmx.groupproj // FMX, no VCL components Delphi 12 : D120InstallVclFmx.groupproj // Both VCL and FireMonkey components C++ Builder 2006 : CB2006Install.bdsgroup C++ Builder 2007 : CB2007Install.groupproj C++ Builder 2009 : CB2009Install.groupproj C++ Builder 2010 : CB2010Install.groupproj C++ Builder XE : CBXeInstall.groupproj C++ Builder XE2 : CBXe2Install.groupproj // VCL only no FireMonkey components C++ Builder XE2 : CBXe2InstallVclFmx.groupproj // Both VCL and FireMonkey components C++ Builder XE3 : CBXe3InstallVclFmx.groupproj // Both VCL and FireMonkey components C++ Builder 10.2 Tokyo : CB102InstallVclFmx.groupproj // Both VCL and FireMonkey components C++ Builder 10.3 Rio : CB103InstallVclFmx.groupproj // Both VCL and FireMonkey components C++ Builder 10.4 Sydney : CB104InstallVclFmx.groupproj // Both VCL and FireMonkey components C++ Builder 11 : CB110InstallVclFmx.groupproj // Both VCL and FireMonkey components Note Delphi/C++ 11.1 and 11.2 use the same packages as Delphi 11 or 11.0, they are updates not new releases. 1 - Do a File/Open Project, navigate to the Install directory, select the correct file and open it. The project manager view should now display two package projects, one run-time and one design-time package. The run-time package name contains the "Run" suffix. The design-time package name contains the "Design" suffix. 2 - Select and Build the run-time package (do not install). 3 - Select and Install the design-time package. After a few seconds, you should have a dialog box telling you the package has been installed with a bunch of new components registered in the Tool Palette under "Overbyte ICS" and "Overbyte ICS SSL". Then do a "Save All" and a "Close All". 4 - One package is installed, called 'Overbyte ICS Design-Time Package for Delphi xxx'. 5 - Various directories under .\Samples\delphi\ include samples that illustrate use of all the ICS components, see later. 6 - Alternatively, recent Delphi versions have a Build Groups pane in the Project Manager, opened by clicking a a button. This allows building multiple packages with multiple configurations and platforms with a single click. After building, the 32-bit design package still need to be installed manually. 7 - Note that some SSL projects may need these (or similar) files adding: "C:\Program Files (x86)\CodeGear\RAD Studio\6.0\lib\psdk\crypt32.lib" "C:\Program Files (x86)\CodeGear\RAD Studio\6.0\lib\psdk\cryptui.lib" Also define SECURITY_WIN32 in the project which should allow OverbyteIcsSspi.hpp to build okay. FIREMONKEY CROSS PLATFORM PACKAGES: 1 - For XE2 and later, DXe?Install (where ? is the version) installs VCL components only, while DXe?InstallVclFmx also installs FireMonkey cross platform components (three run time packages). In order to use this feature first uninstall the old design-time package. 2 = Build all three run-time packages for all available platforms (32-bit and 64-bit Windows and Mac OS X) in the order they are listed in project manager. 3 - Next build and install the three design-time packages in the order they are listed in project manager. 4 - Three packages are installed, called: 'Overbyte ICS Common Design-Time Package for Delphi xxx' 'Overbyte ICS FMX Design-Time Package for Delphi xxx' 'Overbyte ICS VCL Design-Time Package for Delphi xxx' Note that the new packaging is still beta/alpha, both package names and included units might change in a future beta drop. The old VCL packages are still there however they do no longer support FireMonkey and of course only one set of packages can be installed in the IDE at the same time, if you want both VCL and FMX install DXe2InstallVclFmx.groupproj only. Currently the XE2 package cache is buggy and should be disabled by adding the -nocache parameter. 5 - Alternatively, recent Delphi versions have a Build Groups pane in the Project Manager, opened by clicking a a button. This allows building multiple packages with multiple configurations and platforms with a single click. After building, the 32-bit design packages still need to be installed one by one. 6 - The .\Samples\delphi\PlatformDemos\ folder contains FireMonkey sample projects that may all be built with FireMonkey for Mac OS X (and Windows). ALTERNATE INSTALLATION USING THE PACKAGE PROJECT FILES: For each Delphi and C++ Builder version two package project files exist in the .\Packages directory. One run-time and one design-time package project file. The run-time file name contains the "Run" suffix. The design-time file name contains the "Design" suffix. PACKAGE PROJECT FILE NAMES - VCL: Delphi 7 : OverbyteIcsD7Run.dpk, OverbyteIcsD7Design.dpk Delphi 2006 : OverbyteIcsD2006Run.bdsproj, OverbyteIcsD2006Design.bdsproj Delphi 2007 : OverbyteIcsD2007Run.dproj, OverbyteIcsD2007Design.dproj Delphi 2009 : OverbyteIcsD2009Run.dproj, OverbyteIcsD2009Design.dproj Delphi 2010 : OverbyteIcsD2010Run.dproj, OverbyteIcsD2010Design.dproj Delphi XE : OverbyteIcsDXeRun.dproj, OverbyteIcsDXeDesign.dproj Delphi XE2 : OverbyteIcsDXe2Run.dproj, OverbyteIcsDXe2Design.dproj Delphi XE3 : OverbyteIcsDXe3Run.dproj, OverbyteIcsDXe3Design.dproj Delphi XE4 : OverbyteIcsDXe4Run.dproj, OverbyteIcsDXe4Design.dproj Delphi XE5 : OverbyteIcsDXe5Run.dproj, OverbyteIcsDXe5Design.dproj Delphi XE6 : OverbyteIcsDXe6Run.dproj, OverbyteIcsDXe6Design.dproj Delphi XE7 : OverbyteIcsDXe7Run.dproj, OverbyteIcsDXe7Design.dproj Delphi XE8 : OverbyteIcsDXe8Run.dproj, OverbyteIcsDXe8Design.dproj Delphi 10 Seattle : OverbyteIcsD10SRun.dproj, OverbyteIcsD10SDesign.dproj Delphi 10.1 Berlin : OverbyteIcsD101Run.dproj, OverbyteIcsD101Design.dproj Delphi 10.2 Tokyo : OverbyteIcsD102Run.dproj, OverbyteIcsD102Design.dproj Delphi 10.3 Rio : OverbyteIcsD103Run.dproj, OverbyteIcsD103Design.dproj Delphi 10.4 Sydney : OverbyteIcsD104Run.dproj, OverbyteIcsD104Design.dproj Delphi 11 : OverbyteIcsD110Run.dproj, OverbyteIcsD110Design.dproj C++ Builder 2006 : OverbyteIcsCB2006Run.bdsproj, OverbyteIcsCB2006Design.bdsproj C++ Builder 2007 : OverbyteIcsCB2007Run.cbproj, OverbyteIcsCB2007Design.cbproj C++ Builder 2009 : OverbyteIcsCB2009Run.cbproj, OverbyteIcsCB2009Design.cbproj C++ Builder 2010 : OverbyteIcsCB2010Run.cbproj, OverbyteIcsCB2010Design.cbproj C++ Builder XE : OverbyteIcsCBXeRun.cbproj, OverbyteIcsCBXeDesign.cbproj C++ Builder XE2 : OverbyteIcsCBXe2Run.cbproj, OverbyteIcsCBXe2Design.cbproj C++ Builder XE3 : OverbyteIcsCBXe3Run.cbproj, OverbyteIcsCBXe3Design.cbproj PACKAGE PROJECT FILE NAMES - FireMonkey and VCL: Delphi XE2 FMX/VCL : IcsCommonDXe2Run.dproj, IcsCommonDXe2Design.dproj Delphi XE2 VCL : IcsVclDXe2Run.dproj, IcsVclDXe2Design.dproj Delphi XE2 FMX : IcsFmxDXe2Run.dproj, IcsFmxDXe2Design.dproj Delphi XE3 FMX/VCL : IcsCommonDXe3Run.dproj, IcsCommonDXe3Design.dproj Delphi XE3 VCL : IcsVclDXe3Run.dproj, IcsVclDXe3Design.dproj Delphi XE3 FMX : IcsFmxDXe3Run.dproj, IcsFmxDXe3Design.dproj Delphi XE4 FMX/VCL : IcsCommonDXe4Run.dproj, IcsCommonDXe4Design.dproj Delphi XE4 VCL : IcsVclDXe4Run.dproj, IcsVclDXe4Design.dproj Delphi XE4 FMX : IcsFmxDXe4Run.dproj, IcsFmxDXe4Design.dproj Delphi XE5 FMX/VCL : IcsCommonDXe5Run.dproj, IcsCommonDXe5Design.dproj Delphi XE5 VCL : IcsVclDXe5Run.dproj, IcsVclDXe5Design.dproj Delphi XE5 FMX : IcsFmxDXe5Run.dproj, IcsFmxDXe5Design.dproj Delphi XE6 FMX/VCL : IcsCommonDXe6Run.dproj, IcsCommonDXe6Design.dproj Delphi XE6 VCL : IcsVclDXe6Run.dproj, IcsVclDXe6Design.dproj Delphi XE6 FMX : IcsFmxDXe6Run.dproj, IcsFmxDXe6Design.dproj Delphi XE7 FMX/VCL : IcsCommonDXe7Run.dproj, IcsCommonDXe7Design.dproj Delphi XE7 VCL : IcsVclDXe7Run.dproj, IcsVclDXe7Design.dproj Delphi XE7 FMX : IcsFmxDXe7Run.dproj, IcsFmxDXe7Design.dproj Delphi XE8 FMX/VCL : IcsCommonDXe8Run.dproj, IcsCommonDXe8Design.dproj Delphi XE8 VCL : IcsVclDXe8Run.dproj, IcsVclDXe8Design.dproj Delphi XE8 FMX : IcsFmxDXe8Run.dproj, IcsFmxDXe8Design.dproj Delphi 10 Seattle FMX/VCL: IcsCommonD10SRun.dproj, IcsCommonD10SDesign.dproj Delphi 10 Seattle VCL : IcsVclD10SRun.dproj, IcsVclD10SDesign.dproj Delphi 10 Seattle FMX : IcsFmxD10SRun.dproj, IcsFmxD10SDesign.dproj Delphi 10.1 Berlin FMX/VCL: IcsCommonD101Run.dproj, IcsCommonD101Design.dproj Delphi 10.1 Berlin VCL : IcsVclD101Run.dproj, IcsVclD101Design.dproj Delphi 10.1 Berlin FMX : IcsFmxD101Run.dproj, IcsFmxD101Design.dproj Delphi 10.2 Tokyo FMX/VCL: IcsCommonD102Run.dproj, IcsCommonD102Design.dproj Delphi 10.2 Tokyo VCL : IcsVclD102Run.dproj, IcsVclD102Design.dproj Delphi 10.2 Tokyo FMX : IcsFmxD102Run.dproj, IcsFmxD102Design.dproj Delphi 10.3 Rio FMX/VCL : IcsCommonD103Run.dproj, IcsCommonD103Design.dproj Delphi 10.3 Rio VCL : IcsVclD103Run.dproj, IcsVclD103Design.dproj Delphi 10.3 Rio FMX : IcsFmxD103Run.dproj, IcsFmxD103Design.dproj Delphi 10.4 Sydney FMX/VCL : IcsCommonD104Run.dproj, IcsCommonD104Design.dproj Delphi 10.4 Sydney VCL : IcsVclD104Run.dproj, IcsVclD104Design.dproj Delphi 10.4 Sydney FMX : IcsFmxD104Run.dproj, IcsFmxD104Design.dproj Delphi 11 FMX/VCL : IcsCommonD110Run.dproj, IcsCommonD110Design.dproj Delphi 11 VCL : IcsVclD110Run.dproj, IcsVclD110Design.dproj Delphi 11 FMX : IcsFmxD110Run.dproj, IcsFmxD110Design.dproj Delphi 12 FMX/VCL : IcsCommonD120Run.dproj, IcsCommonD120Design.dproj Delphi 12 VCL : IcsVclD120Run.dproj, IcsVclD120Design.dproj Delphi 12 FMX : IcsFmxD120Run.dproj, IcsFmxD120Design.dproj C++ Builder XE2 FMX/VCL : IcsCommonCBXe2Run.cbproj, IcsCommonDXe2Design.cbproj C++ Builder XE2 VCL : IcsVclCBXe2Run.cbproj, IcsVclCBXe2Design.cbproj C++ Builder XE2 FMX : IcsFmxCBXe2Run.cbproj, IcsFmxCBXe2Design.cbproj C++ Builder XE3 FMX/VCL : IcsCommonCBXe3Run.cbproj, IcsCommonDXe3Design.cbproj C++ Builder XE3 VCL : IcsVclCBXe3Run.cbproj, IcsVclCBXe3Design.cbproj C++ Builder XE3 FMX : IcsFmxCBXe3Run.cbproj, IcsFmxCBXe3Design.cbproj C++ Builder 10.2 Tokyo VCL : IcsVclCB102Run.cbproj, IcsVclCB102Design.cbproj C++ Builder 10.2 Tokyo FMX : IcsFmxCB102Run.cbproj, IcsFmxCB102Design.cbproj C++ Builder 10.3 Rio VCL: IcsVclCB103Run.cbproj, IcsVclCB103Design.cbproj C++ Builder 10.3 Rio FMX: IcsFmxCB103Run.cbproj, IcsFmxCB103Design.cbproj C++ Builder 10.4 Sydney VCL: IcsVclCB104Run.cbproj, IcsVclCB104Design.cbproj C++ Builder 11 FMX : IcsFmxCB110Run.cbproj, IcsFmxCB110Design.cbproj C++ Builder 11 VCL : IcsVclCB110Run.cbproj, IcsVclCB110Design.cbproj Note Delphi/C++ 11.1 and 11.2 use the same packages as Delphi 11 or 11.0, they are updates not new releases. 1 - Open and Build the run-time package project (do not install!). 2 - Open and Install the design-time package project. (Do a File/Open Project, browse to the .\Packages directory. Select the correct file and open it. Then in the project manager view, right-click on the package, then click on either the Build or Install button.) 3 - For Delphi XE2 and later, a 64-bit run-time package can be built by changing the package target platform to 64-bit Windows. This has the same name as the 32-bit package, so a different package output directory needs to be specified in Tools / Options / Delphi Options for 64-bit Windows. After a few seconds, you should have a dialog box telling you the package has been installed with a bunch of new components registered in the Tool Palette under "Overbyte ICS" and "Overbyte ICS SSL". Then do a "Save All" and a "Close All". DELPHI 2006/WIN32, 2007/WIN32, 2009/WIN32, 2010/WIN32, XE/WIN32: Having installed the package, verify that the appropriate Win32 Library Path (Tools / Options / Delphi Options / Library - Win32 / Library Path) has been added, .\Lib subdirectory according to version, ie .\Lib\Debug\Win32\D2007 for Delphi 2007. If not, add it manually. It is not mandatory to add .\Lib to the global Delphi path, but it will be much easier for you because otherwise you'll have to add it to each project. DELPHI XE2/WIN32, XE3/WIN32, XE4/WIN32, XE5/WIN32, XE6/WIN32, XE7/WIN32, XE8/WIN32, 10 Seattle/WIN32, 10.1 Berlin/WIN32, 10.2 Tokyo/WIN32, 10.3 Rio/WIN32, 10.4 Sydney/WIN32, 11/WIN32, 12/WIN32, XE2/WIN64, XE3/WIN64, XE4/WIN64,XE5/WIN64, XE6/WIN64, XE7/WIN64, XE8/WIN64, 10 Seattle/WIN64, 10.1 Berlin/WIN64, 10.2 Tokyo/WIN64, 10.3 Rio/WIN64, 10.4 Sydney/WIN64, 11/WIN64, 12/WIN64: Similar to above, but now an extra level, so Tools / Options / Language / Delphi/ Library / select platform as Windows 32-bit or 64-bit, or MacOs 32-bit or 64-bit. Note the Library path is specified separately for 32-bit and 64-bit Platforms. Beware Delphi seems to default to 64-bit platform, and needs to be changed to 32-bit platform before setting the Library path, .\Lib subdirectory according to version, ie .\Lib\Debug\Win64\D103 for Delphi 10.3 Rio 64-bit, DELPHI 7: Add VC32 directory path to your library path (Tools menu / Environment Options / Library / Library Path. Add .\Lib\Debug\Win32\D7 path at the end of the existing path). SAMPLE DELPHI PROJECTS Once the package is installed, you may open the sample projects. There are about 95 samples are split into several directories according to protocols, with a project group that can be opened in all versions of Delphi. .\Samples\delphi\AllDemosProject.bpg .\Samples\delphi\BroswerDemo .\Samples\delphi\FtpDemos\FtpDemos.bpg .\Samples\delphi\MailNewsDemos\MailNewsDemos.bpg .\Samples\delphi\MiscDemos\MiscDemos.bpg .\Samples\delphi\OtherDemos\OtherDemos.bpg .\Samples\delphi\PlatformDemos\XSamples.groupproj .\Samples\delphi\SocketDemos\SocketDemos.bpg .\Samples\delphi\sslinternet\SslDemos.bpg .\Samples\delphi\WebDemos\WebDemos.bpg Full details of the individual sample projects are shown later in this document. AllDemosProject.bpg contains all 94 samples except BrowserDemo (which needs a third party component installed). But building all the samples at the same requires a lot of memory and was not possible until Delphi 10 Seattle and later which have improved memory management. Earlier versions of Delphi will compile each other project group. You might get some dialog box telling you that resource files are missing (they may not have been included in the zip file to save space) and are recreated by Delphi. It is OK. Any other error message is a problem you should fix. After all resource files have been recreated, you should see in the project manager a group of projects. To compile all samples in the group at once, do Project / Build all projects. This may take a few minutes. Note Delphi has warnings which triggers a lot of messages for 100% OK code. You can turn those warnings off in the project/ options / Compiler messages and deselecting: "Deprecated symbol", "Platform symbol", "unsafe type", "unsafe code", "unsafe typecast". Those are intended for .NET and Linux portability. You can safely ignore them if you run windows. For you facility, I included a utility SetProjectOptions (source code, you must compile it) in the internet directory. This utility will update project options to disable the warnings. Once the components are all installed, you may open the sample projects each one after the other and compile them. For each project, do file/open and select the dpr file in the internet directory. Then Project/Build All. C++ BUILDER 2006, 2007, 2009, 2010, XE, XE2, XE3, 10.2 Tokyo, 10.3 Rio, 10.4 Sydney, 11.0: Follow the installation procedure described for Delphi 2006. Just change the project group and package name: use CB2006, CBXe, etc, see above. You can't have Delphi 2006 and CBuilder 2006 packages installed at the same time in the IDE. So when switching from one to the other, be sure to remove the one you don't need. The Embarcadero installation adds this to the system path: C:\Users\Public\Documents\Embarcadero\Studio\20.0\Bpl This however does not allow Win32 packages to be installed, to do that you need to add this path to the system path (win10=Start, Edit the system environment variables, Environment variables, System variables, Path, Edit, New:) C:\Users\Public\Documents\Embarcadero\Studio\20.0\Bpl\Win32 New projects that need to use ICS: include path: - add {THE DIR YOU EXTRACTED ICS To}\source\include\103\win32 library path - add C:\Users\Public\Documents\Embarcadero\Studio\20.0\BPL\Win32 Building the FireMonkey CBXE2InstallVclFmx C++ packages for OSX may trigger an ILINK32 error, this is a bug in C++ Builder reported as QC #103668 the Win32 packages should build without errors. Once the components are all installed, you may open the sample projects each one after the other and compile them. For each project, do file/open and select the dpr file in the internet directory. Then Project/Build All. Projects are located in SAMPLES\CPP\INTERNET\CB2006\ (or CB2006, CBXE, etc) with a project group in each directory, OverbyteIcsCB2006Sam.bdsgroup, OverbyteIcsCBXe2Sam.groupproj, etc. It is likely that for each project, C++ Builder complains about a missing .res file. This is not a problem, C++ Builder will recreate it as needed. They have not been included to save space in the zip file. Once the components are all installed, you may open the sample projects each one after the other and compile them. For each project, do file/open and select the dpr file in the internet directory. Then Project/Build All. NOTES: - You may have an error message, using Delphi or C++ Builder complaining about Font.Charset, OldCreateOrder and other properties. Those are new properties in newer Delphi or C++ Builder versions, newer than the version you use. You can safely ignore those errors because those properties are not used by the components nor sample programs. You may encounter this error at run time. To avoid it, you must open each form at design time and ignore the error. Then recompile. If you don't ignore the error at design time, you'll have it at runtime ! - If you have Delphi or C++ Builder complaining about a file not found, add .\source directory to your library path. - If you are using C++ Builder you may encounter an error at link time such as "Unable to open file MWBCB30.LIB" (or other libs). This is a bug in C++ Builder. To solve it, you can edit project option file (right click in project manager) and remove any reference to the missing libraries. - Don't forget that the C++Builder components are located in .\delphi\vc32 which is object pascal source code (not a problem for C++Builder, just indicate that the *.pas files are displayed when installing). C++Builder will create the *.hpp files. There are some on-line help files in the VC32 directory. Available VCL Components ------------------------ - The following is a list of the files that should be installed in order to properly add all of the available components in this collection: > OverbyteIcsCharsetComboBox.pas Provides easy MIME charset selection > OverbyteIcsDnsQuery DNS lookup component - useful for getting MX records > OverbyteIcsDprUpdFix.pas IDE plugin for Delphi 2009 and 2010 to update old projects > OverbyteIcsEmulVT.pas ANSI terminal emulation in a control > OverbyteIcsFileCopy.pas Indexing, copying and deleting of multiple file directories > OverbyteIcsFileCopyW.pas Same as OverbyteIcsFileCopy but Unicode for Delphi 2007. > OverbyteIcsFingCli.pas FINGER client protocol - Find information about user > OverbyteIcsFtpCli.pas FTP client protocol - file transfer > OverbyteIcsFtpCliW.pas Same as OverbyteIcsFtpCli but Unicode for Delphi 2007. > OverbyteIcsFtpMulti.pas FTP client that indexes, uploads or downloads multiple files > OverbyteIcsFtpMultiW.pas Same as OverbyteIcsFtpMulti but Unicode for Delphi 2007. > OverbyteIcsFtpSrv.pas FTP server protocol - file transfer > OverbyteIcsFtpSrvT.pas FTP server protocol - helpers > OverbyteIcsFtpSrvW.pas Same as OverbyteIcsFtpSrvW but Unicode for Delphi 2007. > OverbyteIcsHttpAppServer.pas HTTP server protocol - used to build advanced web servers > OverbyteIcsHttpMulti.pas HTTP client that downloads multiple files from a list or by parsing web links > OverbyteIcsHttpMultiW.pas Same as OverbyteIcsHttpMulti but Unicode for Delphi 2007. > OverbyteIcsHttpProt.pas HTTP client protocol - used by the web > OverbyteIcsHttpSrv.pas HTTP server protocol - used to build web servers > OverbyteIcsIpStreamLog.pas IP stream logging, using TCP Client or Server, UDP Client or Server, sends simple text > OverbyteIcsLogger.pas A component to log information > OverbyteIcsMailQueue.pas SMTP Mail Queue with extended retries, multiple SMTP servers or MX look up > OverbyteIcsMimeDec.pas MIME component - decode file attach, use with POP3 > OverbyteIcsMQTT.pas MQ Telemetry Transport message queuing service > OverbyteIcsMultiProgressBar.pas A segmented progress bar > OverbyteIcsMultipartFtpDownloader.pas FTP client protocol - download one file using simultaneous connections > OverbyteIcsMultipartHttpDownloader.pas HTTP client protocol - download one file using simultaneous connections > OverbyteIcsNntpCli.pas NNTP client protocol - send and receive newsgroups messages > OverbyteIcsOAuthFormFmx.pas OAuth2 Embedded Browser for FMX > OverbyteIcsOAuthFormVcl.pas OAuth2 Embedded Browser for VCL > OverbyteIcsPing.pas ICMP echo protocol - ping a host > OverbyteIcsPop3Prot.pas POP3 client protocol - get mail from mail server > OverbyteIcsProxy.pas Proxy server protocol - HTTP forward and reverse proxy, and others > OverbyteIcsReg.pas Register design components > OverbyteIcsSmtpProt.pas SMTP client protocol - send mail to server > OverbyteIcsSmtpSrv.pas SMTP server protocol - receive mail from client > OverbyteIcsSnmpCli.pas SNMP client protocol - network management > OverbyteIcsSnmpMsgs.pas SNMP client protocol - message helper > OverbyteIcsSntp.pas Time server and client supporting SNTP time protocol > OverbyteIcsSslHttpOAuth.pas HTTPS OAuth2, and cloud components for email and Twitter > OverbyteIcsSslHttpRest.pas HTTPS REST functions, descends from THttpCli, Send SMS and DNS over HTTPS > OverbyteIcsSysLogClient.pas Syslog Client Protocol - receive syslog messages > OverbyteIcsSysLogDefs.pas Syslog Protocol - helpers > OverbyteIcsSysLogServer.pas Syslog Server Protocol - send syslog messages > OverbyteIcsTnCnx.pas TELNET client protocol - terminal emulation protocol > OverbyteIcsTnEmulVT.pas TELNET and ANSI terminal emulation combined > OverbyteIcsTnOptFrm.pas TELNET Client configuration form > OverbyteIcsTnScript.pas TELNET client protocol - with automation > OverbyteIcsWebSockets.pas WebSocket Server protocol - old version > OverbyteIcsWebSocketCli.pas WebSocket Client protocol > OverbyteIcsWebSocketsrv.pas WebSocket Server protocol - new version > OverbyteIcsWSocket.pas Winsock component - TCP, UDP, DNS, also SSL/TLS X509 certificates. > OverbyteIcsWSocketE.pas Register procedure and property editor for TWSocket > OverbyteIcsWSocketS.pas Winsock component for building servers > OverbyteIcsWSocketTS.pas Winsock component for building multithreaded servers > OverbyteIcsWhoisCli.pas Whois protocol client - The following list support and utilities units: > OverbyteIcsAsn1Utils.pas ASN1 utilities (for TSnmpClient component) > OverbyteIcsAvlTrees.pas Implements a fast cache-like data storage > OverbyteIcsBlacklist.pas Blacklisting of malicious IP addresses, logging functions > OverbyteIcsCRC.pas 32 bit CRC computation > OverbyteIcsCharsetUtils.pas MIME-charset functions > OverbyteIcsCookies.pas Client Cookie Handling > OverbyteIcsCsc.pas character set routines > OverbyteIcsDES.pas Implementation of the Data Encryption Standard (DES) > OverbyteIcsDigestAuth.pas HTTP Digest Access Authentication > OverbyteIcsFormDataDecoder.pas Decode a MIME data block as generated by a HTML form > OverbyteIcsFtpSrvWT.pas Same as OverbyteIcsFtpSrvWT but Unicode for Delphi 2007. > OverbyteIcsHtmlPars.pas HTML web page parser > OverbyteIcsHttpCCodZLib.pas Supports GZIP coding for HttpContCod > OverbyteIcsHttpContCod.pas HTTP Content Coding support, uses extra units > OverbyteIcsIcmp.pas ICMP protocol support, used by the PING component > OverbyteIcsIconv.pas Headers for iconv library (LGPL) > OverbyteIcsLIBEAY.pas Delphi encapsulation for libeay32.dll and libcrypto-1_1.dll (OpenSSL) > OverbyteIcsMD4.pas Implementation of the MD4 Message-Digest Algorithm > OverbyteIcsMD5.pas Implementation of the MD5 Message-Digest Algorithm > OverbyteIcsMLang.pas A few header translations from MS mlang.h > OverbyteIcsMonCommon.pas Internet monitoring common headers and structures > OverbyteIcsMonNdis.pas Npcap NDIS Packet Capture Driver headers. > OverbyteIcsMonPcap.pas Internet monitoring using Npcap NDIS driver > OverbyteIcsMonSocket.pas Internet monitoring using raw sockets > OverbyteIcsMimeUtil.pas Support routines for MIME standard > OverbyteIcsNtlmMsgs.pas Client NTLM authentication messages used within HTTP protocol > OverbyteIcsNtlmSsp.pas Server NTLM authentication of user credentials using Windows SSPI > OverbyteIcsOneTimePw.pas One Time Password support functions, used by FTP > OverbyteIcsSHA1.pas Implementation of US Secure Hash Algorithm 1 (SHA1) > OverbyteIcsSSLEAY.pas Delphi encapsulation for ssleay32.dll and libssl-1_1.dll (OpenSSL) > OverbyteIcsSocketUtils.pas Cross platform socket utilities for ICS > OverbyteIcsSslJose.pas JOSE - Json Object Signing and Encryption > OverbyteIcsSslSessionCache.pas A very fast external SSL-session-cache component > OverbyteIcsSslX509Certs.pas Automatically download SSL X509 certificates from Let's Encrypt and CertCentre AG > OverbyteIcsSslX509Utils.pas SSL key and X509 certification creation > OverbyteIcsSspi.pas A few header translations from MS sspi.h and security.h > OverbyteIcsStreams.pas Fast streams for ICS > OverbyteIcsThreadTimer.pas A custom timer class using custom timer messages from one or more threads > OverbyteIcsTicks64.pas GetTickCount64 support for all versions of Windows > OverbyteIcsTimeList.pas List of items with expiry times, used for WebSessions > OverbyteIcsTypes.pas Common types, mainly for backward compiler compatibility > OverbyteIcsURL.pas Support routines for URL handling > OverbyteIcsUtils.pas Vast number of common utilities, many supporting Unicode for D7/2007 > OverbyteIcsWSockBuf.pas FIFO buffers for TWSocket > OverbyteIcsWebSession.pas Web session support for THttpAppSrv and MidWare > OverbyteIcsWinnls.pas A few header translations for Unicode Normalization in winnls.h > OverbyteIcsWinsock.pas Some Winsock initialisations > OverbyteIcsWMI.pas WMI support functions, setting IP addresses, controlling DNS server. > OverbyteIcsWndControl.pas A class that encapsulates a windows message queue and a message map > OverbyteIcsZLibDll.pas Zlib support, interface to external zlib.dll functions > OverbyteIcsZLibObj.pas Zlib support, interface to zlib linked C OBJ functions > OverbyteIcsZlibHigh.pas Zlib support, high level interface for compression and decompression > WbemScripting_TLB.pas WMI API headers. FireMonkey Cross Platform Support: ---------------------------------- For Delphi and C++ Builder XE2 and later, FireMonkey Desktop applications are an alternate to VCL Forms applications, supporting cross platforms of Windows 32-bit and 64-bit and Mac OS X (and perhaps other platforms in future). FireMonkey uses different visual components to VCL, while some non-visual components can be used for both VCL and FMX projects, while other components need special versions, such as ICS. Earlier betas of V8 used the conditional define "FMX" which is *no longer required in project options. Instead in your existing ICS FireMonkey app. add either "Ics.Fmx" to the unit scope names in project options or apply the following changes in the uses clause, rename: OverbyteIcsBlacklist -> Ics.Fmx.OverbyteIcsBlacklist.pas OverbyteIcsCharsetComboBox -> Ics.Fmx.OverbyteIcsCharsetComboBox.pas OverbyteIcsDnsQuery -> Ics.Fmx.OverbyteIcsDnsQuery.pas OverbyteIcsFileCopy -> Ics.Fmx.OverbyteIcsFileCopy.pas OverbyteIcsFingCli -> Ics.Fmx.OverbyteIcsFingCli.pas OverbyteIcsFtpCli -> Ics.Fmx.OverbyteIcsFtpCli OverbyteIcsFtpMulti -> Ics.Fmx.OverbyteIcsFtpMulti.pas OverbyteIcsFtpSrv -> Ics.Fmx.OverbyteIcsFtpSrv OverbyteIcsHttpAppServer -> Ics.Fmx.OverbyteIcsHttpAppServer.pas OverbyteIcsHttpMulti -> Ics.Fmx.OverbyteIcsHttpMulti.pas OverbyteIcsHttpProt -> Ics.Fmx.OverbyteIcsHttpProt OverbyteIcsHttpSrv -> Ics.Fmx.OverbyteIcsHttpSrv.pas OverbyteIcsIcmp -> Ics.Fmx.OverbyteIcsIcmp.pas OverbyteIcsIpStreamLog -> Ics.Fmx.OverbyteIcsIpStreamLog.pas OverbyteIcsMailQueue -> Ics.Fmx.OverbyteIcsMailQueue.pas OverbyteIcsMsSslUtils -> Ics.Fmx.OverbyteIcsMsSslUtils.pas OverbyteIcsMultipartFtpDownloader -> Ics.Fmx.OverbyteIcsMultipartFtpDownloader.pas OverbyteIcsMultipartHttpDownloader -> Ics.Fmx.OverbyteIcsMultipartHttpDownloader.pas OverbyteIcsNntpCli -> Ics.Fmx.OverbyteIcsNntpCli.pas OverbyteIcsPing -> Ics.Fmx.OverbyteIcsPing.pas OverbyteIcsPop3Prot -> Ics.Fmx.OverbyteIcsPop3Prot.pas OverbyteIcsProxy -> Ics.Fmx.OverbyteIcsProxy.pas OverbyteIcsSmtpProt -> Ics.Fmx.OverbyteIcsSmtpProt.pas OverbyteIcsSntp -> Ics.Fmx.OverbyteIcsSntp.pas OverbyteIcsSocketUtils -> Ics.Fmx.OverbyteIcsSocketUtils.pas OverbyteIcsSslHttpRest -> Ics.Fmx.OverbyteIcsSslHttpRest.pas OverbyteIcsSslJose -> Ics.Fmx.OverbyteIcsSslJose.pas OverbyteIcsSslSessionCache -> Ics.Fmx.OverbyteIcsSslSessionCache.pas OverbyteIcsSslX509Certs -> Ics.Fmx.OverbyteIcsSslX509Certs.pas OverbyteIcsSslX509Utils -> Ics.Fmx.OverbyteIcsSslX509Utils.pas OverbyteIcsThreadTimer -> Ics.Fmx.OverbyteIcsThreadTimer.pas OverbyteIcsWebSocketCli -> Ics.Fmx.OverbyteIcsWebSocketCli OverbyteIcsWebSocketSrv -> Ics.Fmx.OverbyteIcsWebSocketSrv OverbyteIcsWSocket -> Ics.Fmx.OverbyteIcsWSocket OverbyteIcsWSocketS -> Ics.Fmx.OverbyteIcsWSocketS OverbyteIcsWhoisCli -> Ics.Fmx.OverbyteIcsWhoisCli.pas OverbyteIcsWndControl -> Ics.Fmx.OverbyteIcsWndControl { Demo units } OverbyteIcsWebAppServerCounter -> Ics.Fmx.OverbyteIcsWebAppServerCounter OverbyteIcsWebAppServerMailer -> Ics.Fmx.OverbyteIcsWebAppServerMailer The list above is also the list of units that now have different names in the FireMonkey framework however most of them share the same source file. Dropping a ICS component on the form will add the correct unit name for each framework automatically (don't forget to disable the package cache as described above). Delphi Windows Active sample applications: ------------------------------------------ ICS contains over 100 sample applications developed over 25 years, most of the actively maintained demos used to develop and test ICS for Windows VCL applications are combined in the ActiveDemos.groupproj project group, while the SslSpecials.groupproj has a few more that need extra components installed before they can be built. Note all these projects are also in smaller groups sorted by SSL or non-SSL and type, see below. ICS Client Samples ------------------ FrameBrowserIcs Web Browser using TSslHttpCli and HtmlViewer component IcsHttpRestTstFmx FMX HTTPS web, REST and OAuth, Send SMS, Rest Email, and DoH demos IcsHttpsTst FMX HTTP web GET using THttpCli component, tests all commands OverbyteIcsHttpRestTst HTTPS web, REST and OAuth, WebSocket, Send SMS, Rest Email, and DoH demos. OverbyteIcsHttpsTst HTTPS GET using TSslHttpCli component, tests all commands OverbyteIcsIpStmLogTst IP stream logging, sending streams as client or server using TIcsIpStrmLog and IcsHosts OverbyteIcsMailQuTst Mailing list tool using TIcsMailQueue component with SMTP to send email OverbyteIcsMQTTst MQ Telemetry Transport message queuing service OverbyteIcsSnippets Small samples of codes for FTP, HTTP, sockets and email OverbyteIcsSslFtpTst FTP client with SSL/TLS, using TSslFtpClient component, tests all commands OverbyteIcsSslMailRcv POP3 receive email client using TSslPop3Cli component, tests all commands OverbyteIcsSslMailSnd SMTP send email client using TSslSmtpCli component, tests all commands OverbyteIcsSslNewsRdr NNTP Network News Transport client, using TSslNntpCli, tests all commands OverbyteIcsXferTst File copying, FTP upload and download, HTTP download, using TIcsFileCopy, TIcsFtpMulti and TIcsHttpMulti ICS Server Samples ------------------ IcsSslMultiWebServ FMX Multi host HTTPS web server, uses TSslHttpAppSrv and IcsHosts components OverbyteIcsDDWebService Multi host HTTPS web and WebSocket server, uses TSslHttpAppSrv and IcsHosts components, maybe run as a GUI or Windows Service OverbyteIcsIpStmLogTst IP stream logging, sending streams as client or server using TIcsIpStrmLog and IcsHosts OverbyteIcsProxySslServer Proxy server for TCP and HTTP protocols using TIcsProxy and IcsHosts OverbyteIcsSslFtpServ FTP server with SSL/TLS, using TSslFtpServer component OverbyteIcsSslMultiFtpServ Multi host FTP server, using TSslFtpServer and IcsHosts components OverbyteIcsSslMultiWebServ Multi host HTTPS web and WebSocket server, uses TSslHttpAppSrv and IcsHosts components OverbyteIcsSslSmtpServer SMTP receive email server using TSslSmtpServer component OverbyteIcsSslWebServ HTTPS web server, uses TSslHttpServer component ICS Tool Samples ---------------- OverbyteIcsBatchDnsLookup Multiple DNS lookups using TIcsDomainNameCache component OverbyteIcsJoseTst SSL Json Object Signing (Jose) Demos, used for REST and OAUTH2 OverbyteIcsNetMon Internet Packet Monitoring Components, using TIcsMonSocket and TIcsMonPCap OverbyteIcsNetTools Network Tools Demo, uses all the main IP Helper functions and many other components OverbyteIcsNsLookup DNS lookups using the TDnsQuery component, all request types. OverbyteIcsPemTool SSL/TLS Certificate Tool, process certificates using TX509Base and TX509List OverbyteIcsPingTst Trace route and pinging using the TPing and TPingThread components OverbyteIcsWhoisCliTst Whois client, looks up servers automatically, using TIcsWhoisCli component OverbyteIcsWmiTst WMI functions, general purpose, update Windows IP addresses and DNS Server records OverbyteIcsX509CertsTst Download SSL X509 certificates from Let's Encrypt using TSslX509Certs component ICS Miscellaneous Samples ------------------------- OverbyteIcsBinCliDemo Simple TCP client to receive binary and text data for OverbyteIcsTcpSrv OverbyteIcsCliDemo Simple TCP client for OverbyteIcsTcpSrv, IPV4 only OverbyteIcsHttpPost HTTP web POST using THttpCli component, works with all HTTP server samples OverbyteIcsHttpTst HTTP web GET using THttpCli component, tests all commands OverbyteIcsMimeDemo MIME email decoding, attached files are extracted using TMimeDecodeW OverbyteIcsSimpleSslCli Simple SSL TCP client using TSslWSocket component OverbyteIcsSimpleSslServer Simple SSL TCP server using TSslWSocket component OverbyteIcsSocksTst SOCKS and HTTP tunnel proxy client testing using TSslWSocket component OverbyteIcsSnmpCliTst SNMP (simple network management protocol) using TSnmpCli component OverbyteIcsSysLogClientDemo SysLog client using TSysLogClient component OverbyteIcsSysLogServerDemo SysLog server using TSysLogServer component OverbyteIcsTcpSrv Basic TCP server without client forms, uses TWSocketServer, IPv4 only OverbyteIcsTcpSrvIPv6 Basic TCP server without client forms, uses TWSocketServer, IPv4/IPV6 OverbyteIcsTelnetClient Telnet terminal client using TnEmulVT component OverbyteIcsThrdSrv Multithreaded TCP server, banner sent in main thread, uses TWSocketServer component OverbyteIcsThrdSrvV2 Multithreaded TCP server, banner sent in worker thread, uses TWSocketServer component OverbyteIcsThrdSrvV3 Multithreaded TCP server, uses TWSocketThrdServer component OverbyteIcsTimeTst SNTP time protocol client and server, using TIcsTimeClient and TIcsTimeServer components OverbyteIcsWebAppServer HTTPS web server with sessions, uses THttpAppSrv component Most of the above active samples are in .\Samples\delphi\ActiveDemos.groupproj Apart from the three FMX samples which are in .\Samples\delphi\PlatformDemos\XSamples.groupproj And FrameBrowserIcs, OverbyteIcsDDWebService and OverbyteIcsMQTTst which need extra components installed and are in .\Samples\delphi\sslinternet\SslSpecials.groupproj FrameBrowserIcs requires the HtmlViewer component installed from https://github.com/BerndGabriel/HtmlViewer OverbyteIcsDDWebService requires DDService framework to be installed from https://www.magsys.co.uk/delphi/ddservice.asp Pre-Built Samples ----------------- All the above ICS active samples are available as prebuilt executables, to allow ease of testing without needing to install ICS and build them all. They are available to download from the wiki pages: https://wiki.overbyte.eu/wiki/index.php/Main_Page as four separate zip files split into clients, servers, tools and miscellaneous samples. All are built with Delphi 11.3 and those SSL/TLS are built with YuOpenSSL to avoid DLL dependencies. The zips include a few extra SSL certificate and other files to support the samples. These samples should not treated as commercial applications, they are merely to illustrate the type of applications the ICS components can be used to create. Older Project Groups and Samples -------------------------------- OverbyteIcsMQTTst needs the VirtualTree component to be installed from GetIt or https://github.com/TurboPack/VirtualTreeView There are several other older project groups that include older samples, and also all the active samples. Delphi Win32/Win64 FTP sample non-SSL applications -------------------------------------------------- This group contains older FTP applications, without SSL. .\Samples\delphi\FtpDemos\FtpDemos.bpg - Project group > OverbyteIcsBasFtp Basic FTP client program > OverbyteIcsConFtp Basic console mode FTP client > OverbyteIcsFtpAsy Example of asynchronous FTP client > OverbyteIcsFtpMulti Demo to do several FTP downloads in parallel to get a list of files > OverbyteIcsFtpMultipartDownload Demo to FTP download a single large file in several parts in parallel > OverbyteIcsFtpServ General purpose FTP server, uses TSocketServer > OverbyteIcsFtpThrd Demo of multithreaded FTP client, see also FTPASY > OverbyteIcsFtpTst Basic graphical FTP client Delphi Win32/Win64 SMTP, POP3, NNTP non-SSL sample applications --------------------------------------------------------------- This group contains older mail and news applications, without SSL. .\Samples\delphi\MailNewsDemos\MailNewsDemos.bpg - Project group > OverbyteIcsBasNntp Basic NNTP client program > OverbyteIcsConPop3 Basic console mode demo for POP3 (mail receive) > OverbyteIcsConSmtp Basic console mode demo for SMTP (mail send) > OverbyteIcsMailHtml Example of HTML formatted EMail sending, including embedded images > OverbyteIcsMailRcv Internet EMail access using POP3 protocol > OverbyteIcsMailSnd Example of EMail sending using SMTP, including file attach > OverbyteIcsMailSndAsync Example of parallel EMail sending with multiple connections > OverbyteIcsNewsReader Example of TNntpCli component (Send/receive newsgroups) > OverbyteIcsSmtpServer Internet EMail server using SMTP protocol Delphi Win32/Win64 Miscellaneous applications --------------------------------------------- This group contains older miscellaneous applications for testing internal components. .\Samples\delphi\MiscDemos\MiscDemos.bpg - Project group > OverbyteIcsBufStrmTst Test of buffered stream classes > OverbyteIcsCacheTest Test of TCacheTree class used in TSslAvlSessionCache > OverbyteIcsMD4Test Test program for MD4 unit > OverbyteIcsMD5File Example of MD5 unit: computer MD5 checksum for files > OverbyteIcsMD5Test Test program for MD5 unit > OverbyteIcsOneTimePassword One Time Password test routines for OverByteIcsOneTimePw unit > OverbyteIcsSHA1Test Test program for SHA unit > OverbyteIcsThreadTimerDemo Demo for TIcsThreadTimer > OverbyteIcsTicks64Demo GetTickCount64 test routines for OverbyteIcsTicks64 unit > OverbyteIcsTimerDemo Very simple demo for TIcsTimer > OverByteIcsWndControlTest Test program for windows and threads Delphi Win32/Win64 DNS, Ping, SNMP, Syslog sample applications -------------------------------------------------------------- This group contains older FTP applications. .\Samples\delphi\OtherDemos\OtherDemos.bpg - Project group .\Samples\delphi\OtherDemos\OtherDemos64.bpg - Project group with Win64 versions of several samples. > OverbyteIcsConPing Basic console mode demo for ping component > OverbyteIcsDll1 Demo showing how to use a TWSocket component in a DLL > OverbyteIcsDll2 Demo showing how to use a THttpCli component in a DLL > OverbyteIcsDllTst Test program calling ICSDLL1 and ICSDLL2 > OverbyteIcsDnsLook Example of name resolution (IPv6 and IPv4) > OverbyteIcsDnsResolver Batch async DNS lookup event driven using DnsQuery > OverbyteIcsFinger Example of TFingerCli component Delphi FireMonkey cross-platform samples (Delphi XE2 and later) --------------------------------------------------------------- All these samples may be built for Mac OS X (and Windows). .\Samples\delphi\PlatformDemos\XSamples.groupproj > IcsCliDemo Example of client for SRVDEMO, IPV4 only > IcsTcpSrvIPv6 Basic server without client forms, event-driven, IPv4/IPV6 > IcsConSmtp Basic console mode demo for SMTP (mail send) > IcsMailSnd Example of EMail sending using SMTP, including file attach > IcsMailRcv Internet EMail access using POP3 protocol > IcsWebServ Demo of HTTP server, uses TSocketServer > IcsWebAppServ Advanced HTTP server demo, uses WebServ, adds sessions > IcsFtpTst Basic graphical FTP client > IcsFtpServ General purpose FTP server, uses TSocketServer > IcsUdpLstn UDP listen demo > IcsUdpSend UDP send demo > IcsBatchDnsLookup Batch async DNS lookup using DnsLookup (IPv6 and IPv4) > IcsDll1 Demo showing how to use a TWSocket component in a DLL > IcsDll2 Demo showing how to use a THttpCli component in a DLL > IcsDllTst Test program calling ICSDLL1 and ICSDLL2 > IcsThreadTimerDemo Very simple demo for TIcsTimer Delphi Win32/Win64 Socket sample applications --------------------------------------------- This group contains low level socket samples, sending data without a high level protocol, no SSL. .\Samples\delphi\SocketDemos\SocketDemos.bpg - Project group > OverbyteIcsClient5 Basic client GUI applications > OverbyteIcsClient7 Simple client application demonstrating TWSocket > OverbyteIcsConCli1 Basic client/server console applications > OverbyteIcsConCli2 Basic client/server console applications with thread > OverbyteIcsConSrv1 Basic server application in console mode > OverbyteIcsConUdpLstn Console application to listen for UDP messages > OverbyteIcsDynCli Demo of dynamically created TWSocket components > OverbyteIcsMtSrv Basic server, multi-threaded, see THRDSRV for better code > OverbyteIcsRecv Simple file receive (server), use with SENDER demo (client) > OverbyteIcsSender Simple file send (client), use with RECV demo (server) > OverbyteIcsServer5 Basic server GUI applications > OverbyteIcsSrvTcp Basic server without client forms, event-driven > OverbyteIcsSvcTcp Same as SRVTCP but as an NT/2K/XP service > OverbyteIcsTWSChat Chat program (both client and server in a single program) > OverbyteIcsTnDemo Telnet client using a TMemo > OverbyteIcsTnSrv Basic TCP server with client forms, event-driven > OverbyteIcsUdpLstn UDP listen demo > OverbyteIcsUdpSend UDP send demo Delphi Win32/Win64 SSL-enabled sample applications -------------------------------------------------- This group contains some low level SSL test applications. .\Samples\delphi\sslinternet\SslDemos.bpg - Project group .\Samples\delphi\sslinternet\SslDemos64.bpg - Project group with Win64 versions all these samples. > OverbyteIcsMsVerify Verify certificate chain using TMsCertChainEngine which uses MS crypto API > OverbyteIcsSslSniSrv Test of Server Name Indication (SNI) in server mode > OverbyteIcsSslWebAppServer Advanced HTTPS server demo, uses WebServ, adds sessions > OverbyteIcsWebSocketSrv Demo of WebSockets server - old version, now OverbyteIcsSslMultiWebServ > websocketclient.html Web page for WebSockets demo Note following sample is not in the project group since it only builds with Delphi 2007. > OverbyteIcsXferTstW Same as OverbyteIcsXferTst but Unicode for Delphi 2007 Delphi Win32/Win64 HTTP sample applications (the SSL versions are preferred!) ------------------------------------------- This group contains older HTTP applications, without SSL. .\Samples\delphi\WebDemos\WebDemos.bpg - Project group > OverbyteIcsConHttp Basic console mode HTTP client > OverbyteIcsHttpAsp Example of THttpCli component with cookie (POST to an ASP page) > OverbyteIcsHttpAsy Example of THttpCli component with multiple async requests (GET) > OverbyteIcsHttpChk Example of THttpCli to check for valid URL using HEAD request > OverbyteIcsHttpDmo Simple HTTP client demo with proxy > OverbyteIcsHttpGet Example of THttpCli component (GET into a file) > OverbyteIcsHttpMultipartDownload Demo application for TMultipartHttpDownloader > OverbyteIcsHttpPg Example of THttpCli component (POST to CGI script) > OverbyteIcsHttpThrd Example of THttpCli component (multi-threaded GET) > OverbyteIcsIsapi.dll Example of FTP client component within an HTTP server ISAPI extension > OverbyteIcsWebServ Demo of HTTP server, uses TSocketServer Sample Notes ------------ Note 1: Not all samples have been rewritten in C++ for C++ Builder. And those rewritten are frequently much simpler. So C++ Builder user: have a look at the Delphi sample too ! As explained in the component installation, you may encounter an error loading a sample application or running it. This may be because the last time I loaded the form, I was using another Delphi or C++ Builder version which has new properties. You can safely ignore messages related to those new properties. They are not used in the samples. (The properties are CharSet, OldCreateOrder and others). You can also encounter error about duplicate resources. You can ignore them safely. If you have those errors, open each form in the IDE, ignore the error then recompile. If you don't open the form in the IDE, you'll get the errors at runtime and your program will abort. When installing a new version, always delete old dcu, obj, dcpil and always recompile everything ! Close everything before recompiling the library or packages. When installing a new version, be sure to unzip it in the same directory tree as the old one or you'll mess both versions. Getting Started with ICS ------------------------ ICS has a large number of sample application whose primary purpose is to test all the components and to learn about using those components and how to use them in your own applications. There are often several samples for a single protocol with different purposes, so this section should help get you started choosing the components and samples for your internet project. ICS often offers low and high level versions of components, the former allow your application to send the various commands used by the protocol but you need to send those commands in the correct order often dependent upon the result from earlier commands, so you need to understand the protocol, but have control over the commands. The high level components are quicker and easier to implement because they hide most of the protocol and offer complex methods instead such as download a file, they often include extra functionality. Historically, most ICS components are available on non-SSL and SSL versions, these notes assume you are using SSL/TLS components which are often essential today. Note most low level component need SSL/TLS adding using an SslContext and need SSL certificate chain checking added to applications, while the higher level components mostly already include the SslContext and chain checking and hide much of the SSL/TLS complexity making them faster to implement and easier to maintain as SSL changes. Note that any ICS applications using SSL/TLS need to redistribute two or three OpenSSL DLLs unless you license YuOpenSSL from https://www.yunqa.de/ who supply compiled DCUs to replace the DLLs, easing distribution. ICS Code Snippets ----------------- The SSL sample OverbyteIcsSnippets contains small samples of codes for FTP, HTTP, sockets and email. The unit includes several almost self contained methods each implementing a single functions, which are hopefully easier to follow than the normal samples used to develop ICS components and which often become very complicated due to all the different functionality supported. The snippets are heavily documented to try and explain usage. Most of the snippets access Magenta Systems Ltd public ICS web and FTP servers and should just work without change, except for FTP uploading where you will need to request an account by emailing delphi@magsys.co.uk. Snippets available include: Snippet: View Local Directories - print a directory file listing. Snippet: File Copy One File - copy a single file. Snippet: File Copy Multiple Files - copy multiple files. Snippet: FTP View Directories - print a remote directory listing from an FTP site. Snippet: FTP Download One File - download a single file from an FTP site. Snippet: FTP Download Multiple Files - downloads multiple files from an FTP site. Snippet: FTP Upload One File - upload a single file to an FTP site. Snippet: FTP Upload Multiple Files - upload multiple files to an FTP site. Snippet: HTTP Download List of Files - downloads a list of files from a web site. Snippet: HTTP Download Linked Files - downloads multiple files from a web site by parsing HTML pages for links. Snippet: HTTP REST Json Request - makes an HTTP GET request to a REST server receiving a Json response data. Snippet: HTTP REST Download - makes an HTTP GET request to download a file, with optional resume of partial download. Snippet: HTTP POST Upload File - makes a HTTP POST request to upload a file to a special upload web page. Snippet: Local Socket Traffic - Send simple text traffic between two sockets on the same PC, using client server concepts. Snippet: Remote Socket Traffic - Receive simple text traffic from a remote TCP Server. Snippet: WebSocket Client - Connect to a remote WebSocket server to send and receive data. Snippet: Send Email using Mail Queue - Runs a mail queue to send multiple emails with extended retries over many hours or days. World Wide Web, HTTP Client --------------------------- There are four types of HTTP component, with many extra components used to extend their capabilities. TSslHttpCli in unit OverbyteIcsHttpProt is the low level HTTP protocol client that is tested using sample OverbyteIcsHttpsTst. It has buttons for GET and HEAD commands and allows numerous SSL parameters to be specified. POST requests are tested with samples OverbyteIcsHttpPost and OverbyteIcsHttpPg. Other units containing components assisting HTTP include OverbyteIcsHttpCCodZLib, OverbyteIcsHttpContCod, OverbyteIcsCookies, OverbyteIcsMimeUtils, OverbyteIcsFormDataDecoder, OverbyteIcsCharsetUtils, OverbyteIcsMsSslUtils, MIME with sample OverbyteIcsMimeDemo, SSL certificate chains with sample OverbyteIcsMsVerify. Note TSslHttpCli requires an SslContext for SSL configuration. Note HTTP clients do not need SSL/TLS certificates, but generally should check the certificate chains received from HTTPS servers to ensure they are talking to the correct servers. TSslHttpRest in unit OverbyteIcsSslHttpRest is the high level HTTP protocol client that has additional methods and properties for making GET, POST, PUT and HEAD REST (REpresentional State Transfer) client requests, but can still do everything TSslHttpCli does. It includes a TRestParams class to build and encode GET/PUT/POST parameter strings. It also includes SSL configuration and certificate validation with a root bundle, SSL session caching, content compression, content code page decoding, persistent cookies, Json handling, logging and client SSL certificate support. There some REST examples TDnsQueryHttps, TIcsSms, TIcsTwitter and TIcsRestEmail. All tested using sample OverbyteIcsHttpRestTst. TRestOAuth in unit OverbyteIcsSslHttpOAuth handles OAuth1/2 authentication using either embedded EdgeBrowser or TWebBrowser to display the logins web pages, or they can be viewed using an external browser. The unit supports various Microsoft User Authorities for corporate accounts. Note OAuth1/2 use requires a developer application account at Google or Microsoft, or other providers which includes Ids and secrets that need to be securely stored. TIcsHttpMulti in unit OverbyteIcsHttpMulti is another high level HTTP client that allows downloading of multiple files from an HTTP server using full URLs, or listed by parsing links from a web page, using a single function call. It also includes SSL configuration and certificate validation with a root bundle. Tested using sample OverbyteIcsXferTst. TSslWebSocketCli in unit OverbyteIcsWebSocketCli is WebSocket client component that descends from TSslHttpRest so most of it's properties and events are common, but there are new methods and events to access WebSocket servers using ws:// or wss:// URLs. WebSocket is a full duplex TCP protocol for web servers to support interactive web pages, typically dynamic updating such as chat sessions, spell checkers as you type, search hints, etc. ICS has a visual web browser sample FrameBrowserIcs which needs the HtmlViewer component to be installed, which will view simple web pages that don't need Javascript, it logs both HTTP and HTML protocol and can be very useful for debugging. There are two SSL samples OverbyteIcsHttpsTst and OverbyteIcsHttpRestTst that illustrate HTTP GET and POST requests, authentication including OAuth2, file uploading and downloading, cookies, certificate chain verification, content encoding and decoding and WebSockets with a chat demo. There are some older non-SSL demos for console and DLL and threads, see samples OverbyteIcsConHttp, OverbyteIcsHttpAsp and OverbyteIcsHttpThrd. Another sample OverbyteIcsJoseTst can be used to test Json Object Signing (Jose) functions often used for REST requests, URL encoding and decoding and display of Json and XML data. World Wide Web, HTTP Server --------------------------- There are five different HTTP web servers, which are based on TSslWSocketServer. TSslHttpServer in unit OverbyteIcsHttpSrv is the main web server, tested with sample OverbyteIcsSslWebServr, while TSslHttpAppSrv in unit OverbyteIcsHttpAppServer adds session support and page handlers for creating dynamic page web applications tested with sample OverbyteIcsSslWebAppServer. These servers only listen on one IP address and port, but you use multiple components for multiple listeners sharing the same events. Note TSslHttpServer and TSslHttpAppSrv require an SslContext for SSL configuration. The samples are full web servers with a lot of SSL configuration options for an SSL/TLS certificate, note HTTPS servers require an SSL certificate and will not start without one. Both samples include a number of dynamic web pages to illustrate basic web server facilities, including a contact form that sends email. The WebSockets protocol is supported using the THttpWSSrvConn client class instead of THttpAppSrvConnection for only normal HTTP. There is a third more advanced HTTP sample OverbyteIcsSslMultiWebServ which configures TSslHttpAppSrv differently using collections of IcsHosts properties. This allows the web server to listen on multiple IP addresses and ports at the same time, and to support multiple hosts on the same IP address serving different page content (as do most web servers). IcsHosts allow different SSL/TLS certificates to be specified for each host using built-in SslContexts, will automatically create self signed SSL/TLS certificates so the server can start, and will them order free SSL/TLS certificates from Let's Encrypt (provided running on the public internet), and re-order them every three months before they expire. IcsHosts can accept server certificates as PEM or PFX files, or from the Windows Certificate Store (but not from USB dongles). The sample OverbyteIcsSslMultiWebServr is different to most ICS samples in having a minimal GUI and being entirely configured using an INI file, it is really designed to be built as a Windows service application to run unattended in background. It includes a separate web log for each host, and will send emails when it starts and stops. It also includes some anti-hacking tests and will block abusive IP addresses. The sample is based on a commercial web server. Sample OverbyteIcsSslMultiWebServ also includes WebSockets support with simple echo servers and a chat server. Sample OverbyteIcsDDWebService is very similar to OverbyteIcsSslMultiWebServ but designed as a Windows service, although it will also run as a GUI for debugging. It requires DDService service framework to be installed. It also includes a REST server with simple lookup responses from a SQL database, which requires DISQLite3 to be installed. The fifth web server is TSimpleWebSrv in unit OverbyteIcsSslHttpOAuth which is a lightweight server with minimal functionality designed for embedding in applications needing OAuth2 or SSL/TLS certificate ordering that require access to web server to check a host exists. It has a single event that presents a request and returns a response. It supports SSL with IcsHosts. There is no sample, but it is used by other ICS components. File Transfer Protocol, FTP Client ---------------------------------- There are two types of FTP components for file transfers. TSslFtpClient in unit OverbyteIcsFtpCli is the low level FTP client that is tested with sample OverbyteIcsSslFtpTst. It has about 50 buttons the test the various FTP commands in various ways, and allows numerous SSL parameters to be specified. Note TSslFtpClient requires an SslContext for SSL configuration. Other older FTP samples include OverbyteIcsBasFtp, OverbyteIcsConFtp, OverbyteIcsFtpAsy and OverbyteIcsFtpMulti. TIcsFtpMulti in unit OverbyteIcsFtpMulti is a high level FTP client that indexes, uploads or downloads single or multiple files automatically, without needing to understand most FTP commands. One function indexes files and directories on an FTP server building a list compatible with the TIcsFileCopy component that indexes Windows directories, allowing local and remote directories to be compared and files FTP uploaded or downloaded so they match. It also includes SSL configuration and certificate validation with a root bundle, SSL session caching and logging. Use the sample OverbyteIcsXferTst to test TIcsFtpMulti. File Transfer Protocol, FTP Server ---------------------------------- The FTP server is based on TSslWSocketServer. TSslFtpServer in unit OverbyteIcsFtpSrv is the FTP server, tested using sample OverbyteIcsSslFtpServ. The FTP server only listens on one IP address and port, but you use multiple components for multiple listeners sharing the same events. Note TSslFtpServer usually requires an SslContext for SSL configuration. The sample is a full FTP server for file uploads and downloads, with a lot of SSL configuration options for the SSL/TLS certificate and will not start without one. There is a more advanced FTP server sample OverbyteIcsSslMultiFtpServ which configures TSslFtpServer differently using collections of IcsHosts properties. This allows the FTP server to listen on multiple IP addresses and ports at the same time, and to support multiple hosts on the same IP address. IcsHosts allow different SSL/TLS certificates to be specified for each host using built-in SslContexts, will automatically create self signed SSL/TLS certificates so the server can start, and will them order free SSL/TLS certificates from Let's Encrypt (provided running on the public internet), and re-order them every three months before they expire. OverbyteIcsSslMultiFtpServ is different to most ICS samples in having a minimal GUI and being entirely configured using an INI file, it is really designed to be built as a Windows service application to run unattended in background. The sample is based on a commercial FTP server. Sending Email, SMTP Client -------------------------- There are three types of components for sending email using the SMTP protocol or HTTP REST protocol. TSslSmtpCli in unit OverbyteIcsSmtpProt is the low level SMTP client that is tested with sample OverbyteIcsSslMailSnd1. It has about 16 buttons to test various SMTP commands and allow an email to be sent with attachments. Note TSslSmtpCli requires an SslContext for SSL configuration. Other older test samples include OverbyteIcsConSmtp, OverbyteIcsMailHtml and OverbyteIcsMailSndAsync. TIcsMailQueue in unit OverbyteIcsMailQueue is the high level SMTP client, tested by sample OverbyteIcsMailQuTst. It supports extended retries over many hours or days, and supports multiple SMTP relay servers or looks up MX servers using DNS, while alleviating the need for the application to handle retries. It spools emails as EML files, and can send them as well. It includes SSL configuration and certificate validation with a root bundle and logging. TIcsRestEmail in unit OverbyteIcsSslHttpRest is alternative means of sending email using HTTP REST requests to Google and Microsoft, instead of using SMTP. Tested using sample OverbyteIcsHttpRestTst. This component also adds XOAuth2 authentication to the other SMTP components. All the mail components can use TRestOAuth in unit OverbyteIcsSslHttpOAuth to handle OAuth2 authentication using either embedded EdgeBrowser or TWebBrowser to display the logins web pages, or they can be viewed using an external browser. The unit supports various Microsoft User Authorities for corporate accounts. Note OAuth2 use requires a developer application account at Google or Microsoft, or other providers which includes Ids and secrets that need to be securely stored. While mailboxes requiring OAuth2 require an initial interactive login, once that completes successfully a refresh token is returned which can be securely stored and treated like a password for future access without requiring another login. The refresh token can also be used by other applications provided they uses the same account Ids and secrets, allowing non-interactive applications like the ICS web, FTP and proxy servers to use GMail using TIcsMailQueue. Receiving Email, POP3 Client ---------------------------- There are two types of components for receiving email using the POP3 protocol or HTTP REST protocol. TSslPop3Cli in unit OverbyteIcsPop3Prot is the low level POP3 client that is tested with sample OverbyteIcsSslMailSnd1. It has about 22 buttons to test various POP3 commands and allow emails to be retrieved from a mailbox. The unit OverbyteIcsMimeDec contains functions for decoding MIME encoded emails, tested with sample OverbyteIcsMimeDemo. AnOther older test sample is OverbyteIcsConPop3. Note TSslPop3Cli requires an SslContext for SSL configuration. TIcsRestEmail in unit OverbyteIcsSslHttpRest is alternative means of receiving email using HTTP REST requests to Google and Microsoft, instead of using POP3. Tested using sample OverbyteIcsHttpRestTst. This component also adds XOAuth2 authentication to the POP3 component. TRestOAuth in unit OverbyteIcsSslHttpOAuth handles OAuth2 authentication, see above. Forwarding Email, SMTP Server ----------------------------- TSslSmtpServer in unit OverbyteIcsSmtpSrv is an SMTP server that accepts emails from a client, making some checks and adding headers, which is tested by sample OverbyteIcsSslSmtpServ which writes emails to an EML spool file. Note neither component or sample support POP3 access, nor do they do anything with the EML file. The TIcsMailQueue component could be used to forward EML files. Note TSslSmtpServer requires an SslContext for SSL configuration and SSL/TLS certificate, it does not yet support IcsHosts. Simple TCP Socket Client ------------------------ TSslWSocket in unit OverbyteIcsWSocket is the root of most other ICS components opening a socket to either connect to a remote server, or to listen for connections from a remote server. The component always opens a socket by IP address, but will look-up that IP address from a host name if required, or provide a reverse look-up of host or domain name from an IP address. TSslWSocket sends or receives a stream of 8-bit binary characters, but does have methods to send and receive lines by checking or sending a CRLF line ending, which is the Telnet protocol, used for the headers all most other high level protocols like HTTP, FTP, SMTP, etc. TSslWSocket can use TCP or UDP transmission, most protocols use TCP, except DNS and SNMP. TSslWSocket can be tested using samples OverbyteIcsSimpleSslCli, OverbyteIcsCliDemo, OverbyteIcsBinCliDemo, OverbyteIcsUdpLstn, OverbyteIcsUdpSend and many others. Note TSslWSocket requires an SslContext for SSL configuration. TIcsIpStrmLog in unit OverbyteIcsIpStreamLog is a higher level version of TSslWSocket, originally designed for IP stream logging with minimal events and extra coding, including an SslContext and full SSL/TLS certificate chain checking, with better line handling, multiple connection attempts and retries on failure or loss of connection. TIcsIpStrmLog can be configured a client or server, TCP or UDP, and is tested by sample OverbyteIcsIpStmLogTst which can run as client and server at the same time, sending data to itself. Simple TCP Socket Server ------------------------ TSslWSocketServer in unit OverbyteIcsWSocketS is the main socket server accepting a few thousand remote clients using multiple IP addresses and ports, and separately allowing data to be sent and received from those remote clients, all in a single thread. Applications need to derive a client from TSslWSocketClient into which the required functionality is added. TSslWSocketServer supports using collections of IcsHosts properties. This allows the server to listen on multiple IP addresses and ports at the same time with different SSL/TLS certificates for each host using built-in SslContexts, will automatically create self signed SSL/TLS certificates so the server can start, and will them order free SSL/TLS certificates from Let's Encrypt (provided running on the public internet), and re-order them every three months before they expire. TSslWSocketServer is mostly tested using the ICS HTTP and FTP servers, but there are other samples, OverbyteIcsSimpleSslServer, OverbyteIcsTcpSrv, OverbyteIcsTcpSrvIPV6, OverbyteIcsThrdSrv, OverbyteIcsThrdSrvV2, etc. TIcsIpStrmLog mentioned just above uses TSslWSocketServer for simpler server applications with a small number of remote clients. There is also a threaded version TSslWSocketThrdServer in unit OverbyteIcsWSocketTS where each client is created with a separate thread to avoid blocking on high load servers. Beware this server does not yet support IcsHosts and multiple IP addresses, nor is there a web server using it. It is tested using sample OverbyteIcsThrdSrvV3. Forward or Reverse Proxy Server ------------------------------- TIcsProxy and TIcsHttpProxy in unit OverbyteIcsProxy are designed for forward or reverse socket proxying and are tested by sample OverbyteIcsProxySslServer. Despite the component names, these components support SSL using IcsHosts with all the usual functions. TIcsProxy is protocol agnostic and may be used to proxy any TCP protocol, the sample includes SMTP, POP3, NNTP and telnet. TIcsHttpProxy is a full forward and reverse HTTP/HTTPS proxy with header and body parsing and processing host names and URLs to match the source and destination. Note the sample has a minimal GUI and is configuring using an INI file. Websockets Client and Server ----------------------------- See HTTP Client and HTTP Server above. MQ Telemetry Transport ---------------------- TIcsMQTTServer and TIcsMQTTClient in OverbyteIcsMQTT handle the MQ Telemetry Transport message queuing service, tested by sample OverbyteIcsMQTTst which has both client and server, Telnet Client -------------- TTnCnx in unit OverbyteIcsTnCnx implements the TCP/IP telnet protocol including some options negotiations, tested by sample OverbyteIcsTnDemo. TTnEmulVT in unit OverbyteIcsTnEmulVT offers ANSI terminal emulation tested using sample OverbyteIcsTelnetClient. Network News Reader, NNTP Client -------------------------------- TSslNntpCli in unit OverbyteIcsNntpCli is a NNTP client, tested by sample OverbyteIcsSslNewsRdr with 28 buttons for the various commands, Create, Order or Review SSL/TLS Certificates -------------------------------------------- ICS contains many functions for processing SSL/TLS X509 certificates and private keys. TX509Base in unit OverbyteIcsWSocket may contain and server or client certificate, private key and one of more intermediate certificates, and has properties to display most of the certificate elements, all tested by sample OverbyteIcsPemtool. TX509List contains multiple certificates, typically a root store loaded from a PEM file. TMsX509List will load certificates from any Windows Certificate Store including private keys. TSslCertTools in unit OverbyteIcsSslX509Utils can read, create and save certificates, private keys, certificate requests and sign requests as a certificate authority. The OverbyteIcsPemtool sample can be used to create certificates and private keys in various RSA, EC and other formats, create certificate requests and sign requests as a certificate authority, and convert certificate files between different formats, by reading as one and saving as another, also combining keys and certificates in a file. Root stores and single certificates may be to be viewed. Certificates and private keys in Windows Stores may be viewed and deleted, and a PEM or PFX certificate bundle installed into any Windows Store. TSslX509Certs in unit OverbyteIcsSslX509Certs, tested by sample OverbyteIcsX509CertsTst which automatically downloads SSL/TLS X509 certificates from various issuers, including free certificates from Let's Encrypt, and commercial certificates from CertCentre AG. Supports ACME V2 protocol, and REST protocols for specific vendors. Domain and DNS validated certificates should generally be issued without intervention, other commercial certificates may take days to be approved. This unit may be added to ICS server applications using IcsHosts for automatic ordering, while the sample may be separately used to order certificates manually, including DNS validated wildcard certificates from Let'S Encrypt. All orders are kept in a database to allow automatic or manual re-ordering before expiry. Lookup Domain Names, DNS ------------------------ Simple DNS host look-ups using the DNS servers configured for Windows are done using the DnsLookup method in TSslWSocket and also the ReverseDnsLookup method, both fire an event with potentially multiple results, tested by sample OverbyteIcsDnsLook. These methods are used by almost all ICS components, although they currently only use the first IPv4 or IPv6 result returned, if more than one. TDnsQuery in unit OverbyteIcsDnsQuery allows more complex DNS requests to be made to specific DNS servers to get all DNS records such as MX or TXT, tested using sample OverbyteIcsNsLookup. It includes a list of public DNS servers including Google, Cloudfare, OpenDNS and others, and will access these sequentially if one does not respond. TDnsQueryHttps in unit OverbyteIcsSslHttpRest adds DNS over HTTPS for secure lookups. Also tested with sample OverbyteIcsNetTools. TIcsDomNameCache and TIcsDomNameCacheHttps cache forward and reverse DNS lookup requests, mainly for diagnostic components but also for servers logging remote access. May be configured to use Windows lookup, UDP/TCP using TDnsQuery or HTTPS, testing using samples OverbyteIcsBatchDnsLookup and OverbyteIcsNetTools. Unit OverbyteIcsWmi contains a number of functions for accessing a Windows DNS Server (Windows Server 2012 and later) to list DNS zones and zone records, and to add zone records, tested by sample OverbyteIcsWmiTst. The functions are also used by sample OverbyteIcsX509CertsTst to add DNS records for the ACME DNS challenge. Network Diagnostic Tools ------------------------ TPing and TPingThread in unit OverbyteIcsPing is used to ping any host to see if it's available on the internet, note some hosts may deliberately not reply, tested by samples OverbyteIcsPingTst and OverbyteIcsNetTools which both include trace route. TIcsWhoisCli in unit OverbyteIcsWhoisCli makes Whois requests to get details for the registrations of domain names and IP address ranges, tested by samples OverbyteIcsWhoisCliTst and OverbyteIcsNetTools. The component has a large list of Whois servers for various countries around the world. TIcsMonSocket in OverbyteIcsMonSock provides internet packet monitoring using raw sockets. TIcsMonPcap in OverbyteIcsMonPcap provides internet monitoring using the Npcap NDIS driver. There are both tested using sample OverbyteIcsNetMon which is similar to the WireShark diagnostic tool and can be used to monitor internet packets on a LAN, with filtering using TIcsMonFilterClass to include or exclude IPs, port or protocols. TIcsIpChanges in OverbyteIcsIpHlpApi monitors IP address changes and calls an event for new IPs configured or old ones removed. TIcsNeighbDevices in OverbyteIcsIpHlpApi builds a historic LAN MAC device and IPv4 and IPv6 address table using ARP, neighbourhood and IP range scanning with reverse host lookup. Both are tested with sample OverbyteIcsNetTools which also uses several other IpHlp functions including IP Connections list, Network Adaptors and Interfaces, IP Routing and Path tables, ARP tables and Network Statistics. TSnmpCli in unit OverbyteIcsSnmpCli does SNMP (simple network management protocol), tested by sample OverbyteIcsSnmpCliTst. TSysLogClient in unit OverbyteIcsSysLogClient send syslog packets, tested by sample OverbyteIcsSysLogClientDemo. TSysLogServer in unit OverbyteIcsSysLogServer receives syslog packets, tested by sample OverbyteIcsSysLogServerDemo. TIcsTimeClient and TIcsTimeServer in unit OverbyteIcsSntp support SNTP for getting and setting the correct time over the internet, tested using sample OverbyteIcsTimeTst. Release notes ------------- Each component and sample has his own history. You can find those histories in the comment in the beginning of each source file. There are also a bunch of useful comments in the source code. You should at least browse the source for the components you are interested in. Release notes from 2017, releases V8.50 and later, can be found at the wiki site: https://wiki.overbyte.eu/wiki/index.php/Main_Page MidWare ------- If you wants to build client/server applications using TCP/IP protocol, you can do it easily with ICS. But you can do it much more easily using another freeware product from François Piette: MidWare. Available from the same web site https://www.overbyte.be.